What voltage does the CMP DEL UV-C 50 require?

The CMP DEL UV-C 50 operates on 120/240 VAC.

What are the common error codes on the CMP DEL UV-C 50?

Common error codes include: Green Indicator Not Lit, One Or Both UV Lamps Not Lit. See the troubleshooting section for details on each.

Electrical
Voltage	120/240 VAC
Frequency	50/60 Hz
Current Draw	0.8A at 120V / 0.4A at 240V
Max Watts	96W
Performance
Max Flow (GPM)	100 GPM
Physical
Weight	Approx. 28 lb shipping weight
Temperature Range	35F to 104F ambient
Plumbing Connection	Install in the pool main return line after the filter, preferably before the heater and chlorine feeder or chlorine generator.
Flow Switch	Flow Switch Kit EUV-FS-01 required if installed below water level.

Manual gives electrical values, shipping weight, ambient temperature, and 100 GPM max flow.
Uses two germicidal UV lamps tuned to 254 nm.
Manual provides specific troubleshooting checks for indicator and UV lamp failures.

Supplemental sanitizer only; the manual still recommends maintaining a 1-3 ppm free chlorine residual.
Below-water-level installations require the EUV-FS-01 flow switch kit.
UV lamps are mercury-containing service items with an 18-month replacement interval.

Green Indicator Not Lit

Manual troubleshooting starts with no power from the source, breaker checks, loose wiring, wiring breaks, or a burned-out indicator light.

One Or Both UV Lamps Not Lit

Manual troubleshooting lists lamp connector seating, water fouling at lamp connections, bad UV lamp, and bad ballast.

Part	Part Number	Description
Quartz Tube Assembly	`9-1416-01`	Manual service list says to clean every 6 months and replace as needed.
UV Lamp	`9-1421-01`	Manual service list says to replace UV lamps every 18 months.